Compact, ready-to-connect and fully automatic rainwater control center with demand-oriented and in-house drinking water feeding, automatic switchover between service water supply from a cistern or a feed tank, trouble-free operation even in case of rainwater shortage and drinking water separation according to DIN EN 1717.The system consists of a centrifugal pump, an electronic automatic pump switch, a plastic feed tank with mechanical drinking water feeding, a changeover valve, a switch box and a float switch.The pump delivers clean and clear water, free of solids or abrasive particles, and also liquids that are not viscous or aggressive, not crystallized and chemically neutral (similar to the properties of water) and whose temperature is between +0 °C and + 40 °C. The ambient temperature must be between +5 °C and +35 °C, the maximum operating pressure is 6 bar and the system must be installed only in a dry and frost-free environment.
In the standard version with black cover hood made of ABS (plastic) as splash protection against water and for optical rounding. In this version, the cover hood is clad with a highly effective acoustic foam that promises very good sound insulation (up to 25% less noise pollution), has a wide absorption spectrum, is extremely fire-retardant according to class B1 and has a high chemical resistance.
AQUATO® TOPSELLER
AQUATO® menu structurefor AQUATO SBR, fixed bed and fluidized bed systems as well as trickling filter systems and plant beds4 cables with square plugs for the valves Possibility of pressure and current monitoringintegrated power failure notificationuse for 3 or 4 valve manifoldsoptional connection of a clear water pumpIOT capability / portal required
AQUATO® menu structureuniversal control for SBR, SSB®, fixed bed, moving bed, trickling filter systems and plant beds2 float switch inputs6 individually assignable outputseasy connection of existing valves and aggregatesinternal thermostat for control of a cabinet ventilation or heating systempower failure message as well as current & pressure monitoringdrain class C, N, D, D+P, D+H, D+P+Hconnection of an additional high water detectoralso suitable for plants of other manufacturers2nd compressor, additional compressor (only for aeration), charging pump, clear water pump, excess sludge pump, buffer pump/siphon,dosing pump for effluent class D+P, UV lamp for effluent class D+H, additional timed relays for all free outputs
submersible up to 12 m deepsuitable for pumping clean, chemically neutral waterfor use in cisterns and rainwater tanksintegrated pressure switch for automatically switching the pump on and offintegrated floating switch as dry-run protection
material: PE100, SDR11, PN10, butt-welded from mould fittings3x re-inforcded female thread 2"horizontal discharge connection suitable for installation of duplex pumping systemsfor rain- and greywater up to 17 m³/h flowperfect in combination with 2x pipework set DN 50
Housing is supplied without lock, key and without base plate for the compressor
including fastening setconnection pipe sideways G 1" malewithout connection cable
pre-assembled set consists of:1× ball valve 2"1× non-return valve 2"1× PP elbow 2"2× clamp coupling 2" × Ø 63 mm